Is Male Luer Angled 3-Way Connector compatible with ISO 80369?

Definition

The term male luer angled 3-way connector refers to a precision component within IV infusion sets and fluid-transfer lines. It defines how a fluid line connects, branches, seals or regulates, and it is molded to tight tolerances so the interface performs the same way across an entire production lot.

Because the part sits directly in the fluid path, three things matter most: a dependable seal, dimensional consistency from part to part, and a material that is compatible with the fluid and the chosen sterilization method.

It helps to picture where the part sits. A finished single-use device — an IV set, a transfer line, a dialysis circuit — is an assembly of molded plastic pieces joined into one fluid path. Each piece has a narrow job, and the value of standardization is that pieces from a catalog snap together predictably, so an assembler can design around known interfaces instead of bespoke fittings.

About This Component

The Male Luer Angled 3-Way Connector is supplied as a single-use molded part for IV infusion sets and fluid-transfer lines. Its interface follows standard conventions so it mates predictably with compatible components, and it is produced in polycarbonate by default, with other medical-grade resins available on request.

Like all Baixin Bio components, it can be customized for material, color, dimensions, packaging and assembly. For a precise specification — exact dimensions, tolerances, sterilization validation, packaging counts and minimum order quantity — request a drawing and samples through the inquiry form.

Key Advantages

The practical advantages of male luer angled 3-way connector cluster around safety, consistency and supply:

• Compatibility with common sterilization methods
• Standardized interface that interoperates with compliant luer components
• Leak-resistant seal that holds under normal line pressure
• Single-use design that supports sterile, disposable workflows
• Medical-grade resin selected for fluid compatibility

Taken together, these are the reasons device makers standardize on molded medical components rather than improvising connections: the part is predictable, documented and available at volume, which keeps the finished device safe and the production line moving.

Common Applications

You will find male luer angled 3-way connector across a range of single-use fluid-handling assemblies, including:

• Blood and fluid transfer lines
• Hemodialysis circuits
• Enteral feeding sets
• Laboratory fluid handling

What links these applications is risk. Each one moves fluid into or out of a patient or a sample, so a leak, a wrong connection or a contaminated surface has consequences. Standardized single-use components reduce that risk by making every junction predictable and by being discarded rather than reprocessed, which is the safer default for most modern disposable devices.

How to Specify and Choose

Specifying the right part is mostly about matching a handful of variables to your assembly:

• The sterilization method the finished device will undergo
• Whether the part is single-use or intended for limited reuse
• Color coding or opacity requirements for the assembly
• Packaging format and order volume for the program
• The connection standard the mating part uses (luer slip, luer lock or a specific ISO 80369 series)

With those answers in hand, a supplier can confirm a standard part or scope a custom one without back-and-forth. Sharing a drawing or a physical sample removes the remaining ambiguity.

Industry Standards

Two standards questions dominate this category: connection geometry and sterilization. Connection geometry is increasingly defined by the ISO 80369 series, which separates applications so incompatible lines cannot mate; sterilization is handled by validated EO, gamma or steam autoclave processes matched to the resin and the device.

For polycarbonate components, the practical sterilization options are gamma and ethylene oxide (EO); the choice is confirmed against the finished device and its validated process.

Much of the modern standards work exists to prevent misconnection. Historically a single luer taper served many applications, which made cross-connections physically possible; the ISO 80369 series assign distinct geometries to different uses so incompatible lines simply will not mate. When you specify a connector, identifying the correct series for the application is therefore a safety decision, not just a fit decision.

This page is informational and does not replace device-specific regulatory or validation guidance. Confirm exact standards, biocompatibility and sterilization requirements for your product with your quality team and your supplier.

Frequently Asked Questions

Related Products

Related Questions

• What is Male Luer Angled 3-Way Connector used for
• What material is Male Luer Angled 3-Way Connector made of
• What applications is Male Luer Angled 3-Way Connector suitable for
• Can Male Luer Angled 3-Way Connector be sterilized
• What tubing size works with Male Luer Angled 3-Way Connector
• What are the advantages of Male Luer Angled 3-Way Connector
• How does Male Luer Angled 3-Way Connector work
• Where is Male Luer Angled 3-Way Connector commonly used