Is Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves) compatible with ISO 80369?

Definition

A y-type connecting tube set (male luer + two female check valves) is one of the small standardized parts that make a medical fluid path work. Its job is to connect, seal or control flow between two segments of a line, and it is manufactured from device-qualified plastics for reliable single-use performance.

Because the part sits directly in the fluid path, three things matter most: a dependable seal, dimensional consistency from part to part, and a material that is compatible with the fluid and the chosen sterilization method.

It helps to picture where the part sits. A finished single-use device — an IV set, a transfer line, a dialysis circuit — is an assembly of molded plastic pieces joined into one fluid path. Each piece has a narrow job, and the value of standardization is that pieces from a catalog snap together predictably, so an assembler can design around known interfaces instead of bespoke fittings.

About This Component

The Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves) is supplied as a single-use molded part for fluid transfer in IV and disposable assemblies. Its interface follows standard conventions so it mates predictably with compatible components, and it is produced in medical PVC by default, with other medical-grade resins available on request.

Like all Baixin Bio components, it can be customized for material, color, dimensions, packaging and assembly. For a precise specification — exact dimensions, tolerances, sterilization validation, packaging counts and minimum order quantity — request a drawing and samples through the inquiry form.

Key Advantages

For device assemblers specifying y-type connecting tube set (male luer + two female check valves), the benefits that matter most are reliability and repeatability:

• Supports OEM and ODM customization of dimensions and packaging
• High-volume manufacturing with stable quality
• Compatibility with common sterilization methods
• Standardized interface that interoperates with compliant luer components
• Leak-resistant seal that holds under normal line pressure
• Single-use design that supports sterile, disposable workflows

In short, the component earns its place by being unremarkable in the best way: it fits, it seals, it is available, and it behaves the same every time, so engineering attention can go to the device rather than the fitting.

Common Applications

Typical applications for y-type connecting tube set (male luer + two female check valves) span the disposable device landscape:

• Syringe and pump connections
• IV infusion sets
• Blood and fluid transfer lines
• Hemodialysis circuits
• Enteral feeding sets

What links these applications is risk. Each one moves fluid into or out of a patient or a sample, so a leak, a wrong connection or a contaminated surface has consequences. Standardized single-use components reduce that risk by making every junction predictable and by being discarded rather than reprocessed, which is the safer default for most modern disposable devices.

How to Specify and Choose

When you select a component, work through these variables before requesting a quote:

• The fluid and its chemical compatibility with the candidate resin
• The inner and outer diameters of the tubing the part bonds to
• The sterilization method the finished device will undergo
• Whether the part is single-use or intended for limited reuse
• Color coding or opacity requirements for the assembly

Getting these settled early means the first samples are usable and the program moves to volume faster. When a standard part does not fit, the same variables become the brief for an OEM or ODM tooling project.

Industry Standards

The relevant standards work is centered on ISO 80369, the small-bore connector series designed to prevent dangerous misconnections across IV, enteral, respiratory and other applications. Alongside connection standards, material biocompatibility and a validated sterilization method (EO, gamma or autoclave) define whether a component is fit for medical use.

For medical PVC components, the practical sterilization options are EO and gamma; the choice is confirmed against the finished device and its validated process.

Much of the modern standards work exists to prevent misconnection. Historically a single luer taper served many applications, which made cross-connections physically possible; the ISO 80369 series assign distinct geometries to different uses so incompatible lines simply will not mate. When you specify a connector, identifying the correct series for the application is therefore a safety decision, not just a fit decision.

This page is informational and does not replace device-specific regulatory or validation guidance. Confirm exact standards, biocompatibility and sterilization requirements for your product with your quality team and your supplier.

Frequently Asked Questions

Related Products

Related Questions

• What is Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves) used for
• What material is Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves) made of
• What applications is Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves) suitable for
• Can Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves) be sterilized
• What tubing size works with Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves)
• What are the advantages of Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves)
• What is Sterile Tubing Assembly used for
• What material is Sterile Tubing Assembly made of