What tubing size works with Filter Membrane Housing (Large + Small)?

Definition

The term filter membrane housing (large + small) refers to a precision component within IV infusion sets and fluid-transfer lines. It defines how a fluid line connects, branches, seals or regulates, and it is molded to tight tolerances so the interface performs the same way across an entire production lot.

Because the part sits directly in the fluid path, three things matter most: a dependable seal, dimensional consistency from part to part, and a material that is compatible with the fluid and the chosen sterilization method.

It helps to picture where the part sits. A finished single-use device — an IV set, a transfer line, a dialysis circuit — is an assembly of molded plastic pieces joined into one fluid path. Each piece has a narrow job, and the value of standardization is that pieces from a catalog snap together predictably, so an assembler can design around known interfaces instead of bespoke fittings.

About This Component

The Filter Membrane Housing (Large + Small) is supplied as a single-use molded part for IV infusion sets and fluid-transfer lines. Its interface follows standard conventions so it mates predictably with compatible components, and it is produced in ABS by default, with other medical-grade resins available on request.

Like all Baixin Bio components, it can be customized for material, color, dimensions, packaging and assembly. For a precise specification — exact dimensions, tolerances, sterilization validation, packaging counts and minimum order quantity — request a drawing and samples through the inquiry form.

Key Advantages

The practical advantages of filter membrane housing (large + small) cluster around safety, consistency and supply:

• Available in multiple materials and colors
• Supports OEM and ODM customization of dimensions and packaging
• High-volume manufacturing with stable quality
• Compatibility with common sterilization methods
• Standardized interface that interoperates with compliant luer components
• Leak-resistant seal that holds under normal line pressure

None of these advantages matter in isolation; their value is cumulative. A part that seals well but drifts dimensionally, or one that is consistent but slow to supply, fails the assembler. The point is to get all of them at once, reliably, lot after lot.

Common Applications

You will find filter membrane housing (large + small) across a range of single-use fluid-handling assemblies, including:

• IV infusion sets
• Blood and fluid transfer lines
• Hemodialysis circuits
• Enteral feeding sets
• Laboratory fluid handling

Across all of these uses, the underlying requirement is the same: a connection that is secure, leak-resistant and safe to make once and discard. That is why standardized, single-use molded components dominate the category — they remove variability from the most failure-prone part of a fluid path, the junction, and they let a device be assembled quickly and qualified as a unit.

How to Specify and Choose

When you select a component, work through these variables before requesting a quote:

• Whether the part is single-use or intended for limited reuse
• Color coding or opacity requirements for the assembly
• Packaging format and order volume for the program
• The connection standard the mating part uses (luer slip, luer lock or a specific ISO 80369 series)
• The working pressure the junction must hold without leaking or separating

With those answers in hand, a supplier can confirm a standard part or scope a custom one without back-and-forth. Sharing a drawing or a physical sample removes the remaining ambiguity.

Industry Standards

The relevant standards work is centered on ISO 80369, the small-bore connector series designed to prevent dangerous misconnections across IV, enteral, respiratory and other applications. Alongside connection standards, material biocompatibility and a validated sterilization method (EO, gamma or autoclave) define whether a component is fit for medical use.

For ABS components, the practical sterilization options are EO and gamma; the choice is confirmed against the finished device and its validated process.

Much of the modern standards work exists to prevent misconnection. Historically a single luer taper served many applications, which made cross-connections physically possible; the ISO 80369 series assign distinct geometries to different uses so incompatible lines simply will not mate. When you specify a connector, identifying the correct series for the application is therefore a safety decision, not just a fit decision.

This page is informational and does not replace device-specific regulatory or validation guidance. Confirm exact standards, biocompatibility and sterilization requirements for your product with your quality team and your supplier.

Frequently Asked Questions

Related Products

Related Questions

• What is Filter Membrane Housing (Large + Small) used for
• What material is Filter Membrane Housing (Large + Small) made of
• What applications is Filter Membrane Housing (Large + Small) suitable for
• Can Filter Membrane Housing (Large + Small) be sterilized
• Is Filter Membrane Housing (Large + Small) compatible with ISO 80369
• What are the advantages of Filter Membrane Housing (Large + Small)
• What is Male Luer Angled 3-Way Connector used for
• What material is Male Luer Angled 3-Way Connector made of