What is Single-Stripe Straight Tubing used for?

Definition

At its core, a single-stripe straight tubing is a molded plastic component that creates or controls a connection in a medical fluid line. It is engineered so that tubing, syringes, devices and accessories join with a predictable, leak-resistant fit, and it is produced as a single-use part from medical-grade thermoplastics.

What separates a medical-grade part from a generic fitting is repeatability. Sealing surfaces are smooth and consistent, dimensions hold across the lot, and the resin is selected for fluid compatibility and sterilization.

It helps to picture where the part sits. A finished single-use device — an IV set, a transfer line, a dialysis circuit — is an assembly of molded plastic pieces joined into one fluid path. Each piece has a narrow job, and the value of standardization is that pieces from a catalog snap together predictably, so an assembler can design around known interfaces instead of bespoke fittings.

About This Component

The Single-Stripe Straight Tubing is supplied as a single-use molded part for fluid transfer in IV and disposable assemblies. Its interface follows standard conventions so it mates predictably with compatible components, and it is produced in medical PVC by default, with other medical-grade resins available on request.

Like all Baixin Bio components, it can be customized for material, color, dimensions, packaging and assembly. For a precise specification — exact dimensions, tolerances, sterilization validation, packaging counts and minimum order quantity — request a drawing and samples through the inquiry form.

Key Advantages

The practical advantages of single-stripe straight tubing cluster around safety, consistency and supply:

• Medical-grade resin selected for fluid compatibility
• Dimensional consistency across production lots
• Smooth fluid-contact surfaces for reliable connection
• Available in multiple materials and colors
• Supports OEM and ODM customization of dimensions and packaging
• High-volume manufacturing with stable quality

None of these advantages matter in isolation; their value is cumulative. A part that seals well but drifts dimensionally, or one that is consistent but slow to supply, fails the assembler. The point is to get all of them at once, reliably, lot after lot.

Common Applications

You will find single-stripe straight tubing across a range of single-use fluid-handling assemblies, including:

• Enteral feeding sets
• Laboratory fluid handling
• Irrigation sets
• Disposable diagnostic devices
• Syringe and pump connections

What links these applications is risk. Each one moves fluid into or out of a patient or a sample, so a leak, a wrong connection or a contaminated surface has consequences. Standardized single-use components reduce that risk by making every junction predictable and by being discarded rather than reprocessed, which is the safer default for most modern disposable devices.

How to Specify and Choose

A good specification answers a short list of questions up front:

• Color coding or opacity requirements for the assembly
• Packaging format and order volume for the program
• The connection standard the mating part uses (luer slip, luer lock or a specific ISO 80369 series)
• The working pressure the junction must hold without leaking or separating
• The fluid and its chemical compatibility with the candidate resin

With those answers in hand, a supplier can confirm a standard part or scope a custom one without back-and-forth. Sharing a drawing or a physical sample removes the remaining ambiguity.

Industry Standards

The relevant standards work is centered on ISO 80369, the small-bore connector series designed to prevent dangerous misconnections across IV, enteral, respiratory and other applications. Alongside connection standards, material biocompatibility and a validated sterilization method (EO, gamma or autoclave) define whether a component is fit for medical use.

For medical PVC components, the practical sterilization options are EO and gamma; the choice is confirmed against the finished device and its validated process.

The reason the standards landscape moved toward ISO 80369 is patient safety: when every line used the same luer taper, it was physically possible to connect, say, an enteral line to an intravenous one. The newer series give different applications deliberately incompatible geometries so a dangerous misconnection cannot be made by accident. For a component maker, that means confirming which series an application requires before specifying a part.

This page is informational and does not replace device-specific regulatory or validation guidance. Confirm exact standards, biocompatibility and sterilization requirements for your product with your quality team and your supplier.

Frequently Asked Questions

Related Products

Related Questions

• What is Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves) used for
• What material is Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves) made of
• What applications is Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves) suitable for
• Can Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves) be sterilized
• Is Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves) compatible with ISO 80369
• What tubing size works with Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves)
• What are the advantages of Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves)
• What is Sterile Tubing Assembly used for