What is Single-Stripe Co-Extruded Tubing used for?

Definition

A single-stripe co-extruded tubing is one of the small standardized parts that make a medical fluid path work. Its job is to connect, seal or control flow between two segments of a line, and it is manufactured from device-qualified plastics for reliable single-use performance.

Because the part sits directly in the fluid path, three things matter most: a dependable seal, dimensional consistency from part to part, and a material that is compatible with the fluid and the chosen sterilization method.

Seen in context, the component is one link in a chain. A complete single-use set joins several molded parts into one continuous fluid path, and each junction has to seal and hold. Because the interfaces are standardized, an assembler can combine catalog parts with confidence rather than designing every joint from scratch.

About This Component

The Single-Stripe Co-Extruded Tubing is supplied as a single-use molded part for fluid transfer in IV and disposable assemblies. Its interface follows standard conventions so it mates predictably with compatible components, and it is produced in medical PVC by default, with other medical-grade resins available on request.

Like all Baixin Bio components, it can be customized for material, color, dimensions, packaging and assembly. For a precise specification — exact dimensions, tolerances, sterilization validation, packaging counts and minimum order quantity — request a drawing and samples through the inquiry form.

Key Advantages

For device assemblers specifying single-stripe co-extruded tubing, the benefits that matter most are reliability and repeatability:

• Smooth fluid-contact surfaces for reliable connection
• Available in multiple materials and colors
• Supports OEM and ODM customization of dimensions and packaging
• High-volume manufacturing with stable quality
• Compatibility with common sterilization methods

In short, the component earns its place by being unremarkable in the best way: it fits, it seals, it is available, and it behaves the same every time, so engineering attention can go to the device rather than the fitting.

Common Applications

Typical applications for single-stripe co-extruded tubing span the disposable device landscape:

• Irrigation sets
• Disposable diagnostic devices
• Syringe and pump connections
• IV infusion sets

Across all of these uses, the underlying requirement is the same: a connection that is secure, leak-resistant and safe to make once and discard. That is why standardized, single-use molded components dominate the category — they remove variability from the most failure-prone part of a fluid path, the junction, and they let a device be assembled quickly and qualified as a unit.

How to Specify and Choose

Specifying the right part is mostly about matching a handful of variables to your assembly:

• The connection standard the mating part uses (luer slip, luer lock or a specific ISO 80369 series)
• The working pressure the junction must hold without leaking or separating
• The fluid and its chemical compatibility with the candidate resin
• The inner and outer diameters of the tubing the part bonds to
• The sterilization method the finished device will undergo

Once these are defined, sample qualification against your own process is the last step before volume. If no catalog part matches, these same inputs drive a custom mold.

Industry Standards

Two standards questions dominate this category: connection geometry and sterilization. Connection geometry is increasingly defined by the ISO 80369 series, which separates applications so incompatible lines cannot mate; sterilization is handled by validated EO, gamma or steam autoclave processes matched to the resin and the device.

For medical PVC components, the practical sterilization options are EO and gamma; the choice is confirmed against the finished device and its validated process.

The reason the standards landscape moved toward ISO 80369 is patient safety: when every line used the same luer taper, it was physically possible to connect, say, an enteral line to an intravenous one. The newer series give different applications deliberately incompatible geometries so a dangerous misconnection cannot be made by accident. For a component maker, that means confirming which series an application requires before specifying a part.

This page is informational and does not replace device-specific regulatory or validation guidance. Confirm exact standards, biocompatibility and sterilization requirements for your product with your quality team and your supplier.

Frequently Asked Questions

Related Products

Related Questions

• What is Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves) used for
• What material is Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves) made of
• What applications is Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves) suitable for
• Can Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves) be sterilized
• Is Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves) compatible with ISO 80369
• What tubing size works with Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves)
• What are the advantages of Y-Type Connecting Tube Set (Male Luer + Two Female Check Valves)
• What is Sterile Tubing Assembly used for