What tubing size works with Locking-Cap Flexible Luer 3-Way Connector?

Definition

The term locking-cap flexible luer 3-way connector refers to a precision component within IV infusion sets and fluid-transfer lines. It defines how a fluid line connects, branches, seals or regulates, and it is molded to tight tolerances so the interface performs the same way across an entire production lot.

The component is small, but it carries real responsibility: a poor seal or an out-of-tolerance dimension can compromise an entire single-use assembly, which is why medical molders control material, tooling and process tightly.

To put it in context: a disposable fluid-handling device is rarely one molding. It is a chain of small components — connectors, valves, chambers, clamps, caps and tubing — assembled into a single path. Standard interfaces are what let those components come from a catalog and still fit, which is the whole reason this category of part exists.

About This Component

The Locking-Cap Flexible Luer 3-Way Connector is supplied as a single-use molded part for IV infusion sets and fluid-transfer lines. Its interface follows standard conventions so it mates predictably with compatible components, and it is produced in polycarbonate by default, with other medical-grade resins available on request.

Like all Baixin Bio components, it can be customized for material, color, dimensions, packaging and assembly. For a precise specification — exact dimensions, tolerances, sterilization validation, packaging counts and minimum order quantity — request a drawing and samples through the inquiry form.

Key Advantages

The reasons locking-cap flexible luer 3-way connector is specified come down to a few concrete advantages:

• Compatibility with common sterilization methods
• Standardized interface that interoperates with compliant luer components
• Leak-resistant seal that holds under normal line pressure
• Single-use design that supports sterile, disposable workflows
• Medical-grade resin selected for fluid compatibility
• Dimensional consistency across production lots

Taken together, these are the reasons device makers standardize on molded medical components rather than improvising connections: the part is predictable, documented and available at volume, which keeps the finished device safe and the production line moving.

Common Applications

In practice, locking-cap flexible luer 3-way connector appears wherever a controlled fluid connection is needed:

• Blood and fluid transfer lines
• Hemodialysis circuits
• Enteral feeding sets
• Laboratory fluid handling
• Irrigation sets

The common thread is that every one of these settings needs junctions it can trust. A standardized, single-use component delivers that trust at scale: the same interface, the same seal and the same material behavior across an entire production lot, so the clinical team and the device maker are not relying on a one-off fitting at a critical point in the line.

How to Specify and Choose

When you select a component, work through these variables before requesting a quote:

• The sterilization method the finished device will undergo
• Whether the part is single-use or intended for limited reuse
• Color coding or opacity requirements for the assembly
• Packaging format and order volume for the program
• The connection standard the mating part uses (luer slip, luer lock or a specific ISO 80369 series)

With those answers in hand, a supplier can confirm a standard part or scope a custom one without back-and-forth. Sharing a drawing or a physical sample removes the remaining ambiguity.

Industry Standards

The relevant standards work is centered on ISO 80369, the small-bore connector series designed to prevent dangerous misconnections across IV, enteral, respiratory and other applications. Alongside connection standards, material biocompatibility and a validated sterilization method (EO, gamma or autoclave) define whether a component is fit for medical use.

For polycarbonate components, the practical sterilization options are gamma and ethylene oxide (EO); the choice is confirmed against the finished device and its validated process.

The reason the standards landscape moved toward ISO 80369 is patient safety: when every line used the same luer taper, it was physically possible to connect, say, an enteral line to an intravenous one. The newer series give different applications deliberately incompatible geometries so a dangerous misconnection cannot be made by accident. For a component maker, that means confirming which series an application requires before specifying a part.

This page is informational and does not replace device-specific regulatory or validation guidance. Confirm exact standards, biocompatibility and sterilization requirements for your product with your quality team and your supplier.

Frequently Asked Questions

Related Products

Related Questions

• What is Male Luer Angled 3-Way Connector used for
• What material is Male Luer Angled 3-Way Connector made of
• What applications is Male Luer Angled 3-Way Connector suitable for
• Can Male Luer Angled 3-Way Connector be sterilized
• Is Male Luer Angled 3-Way Connector compatible with ISO 80369
• What tubing size works with Male Luer Angled 3-Way Connector
• What are the advantages of Male Luer Angled 3-Way Connector
• How does Male Luer Angled 3-Way Connector work